Remote Commands
R&S
®
Cable Rider ZPH
236
User Manual 1321.0950.02 ─ 03
SYSTem:PRESet:MODE
<Mode>
This command selects the preset mode.
Parameters:
<Mode>
DEFault | USER
DEFault
Default preset state.
USER
User defined preset state.
Example:
SYST:PRES:MODE USER
Selects a user defined preset.
SYSTem:PRESet:USER
<PathName>
This command selects a file containing a user defined preset state.
Parameters:
<PathName>
Filename of the user defined preset state.
SYSTem:REBoot
This command initiates a reboot of the R&S Cable Rider ZPH.
This command is an event and therefore has no *RST value and no query.
Example:
SYST:REB
Restarts the R&S Cable Rider ZPH.
Usage:
Event
SYSTem:SHUTdown
This command turns the R&S Cable Rider ZPH off.
This command is an event and therefore has no *RST value and no query.
Example:
SYST:SHUT
Turns the R&S Cable Rider ZPH off.
Usage:
Event
SYSTem:TIME
<Hour>, <Minutes>, <Seconds>
This command sets the internal clock.
Parameters:
<Hour>
Range:
0 to 23
<Minutes>
Range:
0 to 59
<Seconds>
Range:
0 to 59
Remote Control - Commands
