Instrument Functions
R&S
®
Cable Rider ZPH
77
User Manual 1321.0950.02 ─ 03
The rotary knob has several functions:
●
Increments (clockwise direction) or decrements (counter-clockwise direction) the
instrument parameters at a defined step width in the case of a numeric entry
●
Shifts markers, limit lines and display line on the screen
●
Acts like a cursor key in dialog boxes or softkey submenus.
●
Moves the scroll bar vertically if the scroll bar is in focused
●
Acts as an enter key when pressed
5.4 Presetting the R&S Cable Rider ZPH
Before you prepare a measurement, it is recommended to preset the R&S Cable Rider
ZPH. During a preset, the R&S Cable Rider ZPH resets all settings to their default
state. Restoring the default configuration has the advantage that old settings do not
affect measurements.
The default setup is specific to the operating mode.
► Press the PRESET key.
The R&S Cable Rider ZPH restores its default setup.
You can load or discard a previous calibration data during a preset.
You can also define your own default settings via a dataset. This dataset is then loa-
ded after pressing the PRESET key instead of the factory default.
1. Press the SETUP key.
2. Select the "User Preference" softkey.
3. In the "User Preferences" dialog box, select the "Preset Dataset" item.
The R&S Cable Rider ZPH displays the file manager dialog box to select the data-
set that contains the settings you would like to have as the preset settings.
Presetting the R&S Cable Rider ZPH
