Rohde & Schwarz Cable Rider ZPH, User Manual

Page: 165 / 314

Cable and Antenna Test Mode
R&S
®
Cable Rider ZPH
130 User Manual 1321.0950.02 ─ 03
Removing delta markers only
1. Press the MARKER key.
2. Select the "Delete Marker" softkey.
The R&S Cable Rider ZPH opens a submenu to select the marker deletion.
3. Select the "Delete All Delta" menu item.
The R&S Cable Rider ZPH deletes all delta markers.
Removing all markers at the same time.
Special touchscreen gesture
Draw an "X" on the trace window to delete all markers and delta markers on the trace
window.
See
Chapter 5.1.6, "Delete All Markers" , on page 71.
1. Press the MARKER key.
2. Select the "Delete Marker" softkey.
The R&S Cable Rider ZPH opens a submenu to select the marker deletion.
3. Select the "Delete All" menu item.
The R&S Cable Rider ZPH deletes all markers and delta markers.
View List
You can hide or un-hide the display of the Measurement Result View .
Special touchscreen gesture
Swipe up or down vertically on the Measurement Result View to hide or unhide the
marker list.
See
Chapter 5.1.7, "Hide or Unhide Measurement Result View Display" , on page 71.
1. Press the MARKER key.
2. Select the "View List" softkey.
The R&S Cable Rider ZPH hide or un-hide the Measurement Result View , depend-
ing on its original state.
7.3.3 Using Display Line
Like markers, display line helps you to determine the level of the signal.
A display line is a blue straight line that runs horizontally and corresponds to a certain
level value. You can move the display line to each pixel in the display. This means that
the accuracy and exact vertical position of the display line depends on the resolution of
the vertical axis.
Analyzing Measurement Results