Basic Operation
R&S
®
Cable Rider ZPH
38
User Manual 1321.0950.02 ─ 03
2. Select the required date format from the drop-down menu.
Setting the length unit
The R&S Cable Rider ZPH provides two different formats to configure the cable length
unit.
1. In the "Instrument Setup" dialog box, select the "Length Unit" item.
A drop- down menu opens to select the length unit.
2. Select the required length unit from the drop-down menu.
4.2.5 Configuring the Display
The display setting configures the display characteristics and the touch interface.
The display of the R&S Cable Rider ZPH is a TFT color LCD display.
The ideal brightness of the display depends on the intensity of the backlight. To strike a
balance between battery operating time and screen display quality, set the backlight
intensity to the minimum brightness needed.
To optimize the viewing angle, adjust the display color scheme settings. To achieve the
maximum contrast, the screen can be switched from color display to black-and-white
display.
The intensity of the keyboard backlight is adjustable with a time delay setting to turn off
the backlight. The keyboard backlight remains on until the time specified by the "Key-
board Backlight Delay" or a subsequent key is pressed.
Adjusting the display backlight
1. In the "Instrument Setup" dialog box, select the "Display Backlight" item.
2. Enter the backlight intensity you want with the numeric keys.
Configuring the R&S Cable Rider ZPH
