manualshive.com logo in svg

Rohde & Schwarz Cable Rider ZPH, User Manual

Share
Download
Rohde & Schwarz Cable Rider ZPH User Manual Download Page 74

Basic Operation

R&S

®

Cable Rider ZPH

39

User Manual 1321.0950.02 ─ 03

The backlight intensity is a percentage from 0% to 100% with 100% being the
brightest.

3. Confirm the entry with the rotary knob.

Adjusting the display color scheme

1. In the "Instrument Setup" dialog box, select the "Display Color Scheme" item.

A drop- down menu opens to select the display color scheme.

2. Select the desire color scheme from the drop-down menu.

a) "Color" selects a color display.
b) "Black & White" selects monochrome display.
c) "Printer Friendly" inverts the colors.

Adjusting the keyboard backlight

1. In the "Instrument Setup" dialog box, select the "Keyboard Backlight" item.

2. Enter the backlight intensity you want with the numeric keys.

The backlight intensity is a percentage from 0% to 100% with 100% being the
brightest.

3. Confirm the entry with the rotary knob.

Adjusting the keyboard backlight delay

1. In the "Instrument Setup" dialog box, select the "Display Backlight" item.

2. Enter the time you want to turn off the keyboard backlight with the numeric keys.

The time delay has a range of 1s to 10s.

Configuring the R&S Cable Rider ZPH

Summary of Contents for Cable Rider ZPH



























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands