Cable and Antenna Test Mode
R&S
®
Cable Rider ZPH
129
User Manual 1321.0950.02 ─ 03
Automatic Positioning of Markers
The R&S Cable Rider ZPH offers functions that make setting the markers easier or
allow to make instrument settings on the basis of the current marker position:
1. Press the MARKER key.
2. Select the affected marker in the
Alternatively, select the "Select Marker" softkey to select the affected marker.
3. Select the "Set Marker" softkey.
The R&S Cable Rider ZPH opens a submenu to select the marker automatic posi-
tioning settings.
4. Select the marker automatic position that you require.
The R&S Cable Rider ZPH positions the marker accordingly.
The R&S Cable Rider ZPH provides the following selections for automatic positioning
of markers:
●
"Set To Peak"
The peak function places the active marker or the delta marker on the highest level
value of the trace.
●
"Set To Next Peak"
The Next Peak function places the active marker or delta marker on the next high-
est level value of the trace, relative to its current position.
●
"Set To Minimum"
The minimum function places the active marker or delta marker on the lowest value
of the trace.
●
"All Marker To Peak"
This function place all the active markers to the peak values of the trace.
Removing Markers
Remove markers any time you want from the trace window.
Removing selected markers
Deactivating markers
If you delete main marker ("M1"), all delta markers that are relative to that marker are
also deleted.
1. Select the marker you want to delete in the
.
Alternatively, select the "Select Marker" softkey to select the marker you want to
delete.
2. Select the "Delete Marker" softkey.
The R&S Cable Rider ZPH opens a submenu to select the marker deletion.
3. Select the "Delete Selected" menu item.
The R&S Cable Rider ZPH deletes the marker.
Analyzing Measurement Results
