![background image](http://html1.mh-extra.com/html/omron/sysmac-cs-series/sysmac-cs-series_reference-manual_742030212.webp)
172
Sequence Input Instructions
Section 3-3
Description
OR NOT is used for a normally closed bit connected in parallel. A normally
closed bit is configured to form a logical OR with a logic block beginning with a
LOAD or LOAD NOT instruction (connected to the bus bar or at the beginning
of the logic block). If there is no immediate refreshing specification, the speci-
fied bit in I/O memory is read. If there is an immediate refreshing specification,
the status of the Basic Input Unit’s input terminal is read.
Flags
There are no flags affected by this instruction.
Precautions
Immediate refresh (!) can be specified for OR NOT. An immediate refresh
instruction updates the status of the input bit just before the instruction is exe-
cuted from a Basic Input Unit (but not Basic Input Units on Slave Racks or for
C200H Group 2 Multi-point Input Units).
Example
3-3-7
AND LOAD: AND LD
Purpose
Takes a logical AND between logic blocks.
Ladder Symbol
Variations
Applicable Program Areas
Index Registers
---
Indirect addressing using
Index Registers
,IR0 to ,IR15
–2048 to +2047 ,IR0 to –2048 to +2047 ,IR15
DR0 to DR15, IR0 to IR15
,IR0+(++) to ,IR15+(++)
,–(– –)IR0 to, –(– –)IR15
Area
OR NOT bit operand
Instruction
Operand
LD
000000
AND
000001
AND
000002
OR
000003
AND
000004
LD
000005
AND
000006
OR NOT
000007
AND LD
---
OUT
000008
Logic block
Logic block
Variations
Creates ON Each Cycle AND Result is ON
AND LD
Immediate Refreshing Specification
Not supported.
Block program areas
Step program areas
Subroutines
Interrupt tasks
OK
OK
OK
OK
Summary of Contents for SYSMAC CS Series
