![background image](http://html1.mh-extra.com/html/omron/sysmac-cs-series/sysmac-cs-series_reference-manual_742030225.webp)
185
Sequence Output Instructions
Section 3-4
In the following example, CIO 000001 is turned ON when CIO 000000 is ON
and bit 5 of D00010 is OFF.
OR TST(350) and OR TSTN(351)
In the following example, CIO 000001 is turned ON when CIO 000000 or bit 3
of D00010 is ON.
In the following example, CIO 000001 is turned ON when CIO 000000 is ON
or bit 3 of D00010 is OFF.
3-4
Sequence Output Instructions
3-4-1
OUTPUT: OUT
Purpose
Outputs the result (execution condition) of the logical processing to the speci-
fied bit.
Ladder Symbol
Variations
Note Immediate refreshing is not supported by CS1D CPU Units.
&3
&5
&3
&3
Variations
Executed Each Cycle for ON Condition
OUT
Executed Once for Upward Differentiation
Not supported.
Executed Once for Downward Differentiation
Not supported.
Immediate Refreshing Specification (See note.)
!OUT
Summary of Contents for SYSMAC CS Series
