![background image](http://html1.mh-extra.com/html/omron/cj1w-ma-rev-10-2008/cj1w-ma-rev-10-2008_operation-manual_742343627.webp)
600
Changing to CS1W/CJ1W-NC271/471/F71 from CS1W/CJ1W-NC113/133/213/233/413/433
Appendix E
• Common Parameters and Axis Parameters
These parameters are transferred to the PCU using the data transfer bits (WRITE DATA, READ DATA, and
SAVE DATA) in the Common Operating Memory Area.
• Servo Parameters
These parameters are transferred to each axis using the Servo Parameter transfer bits (WRITE SERVO
PARAMETER, READ SERVO PARAMETER, and SAVE SERVO PARAMETER) in the Axis Operating Out-
put Memory Area. Parameters are transferred between the PLC and Servo Drive by executing these Servo
Parameter transfer functions.
The IOWR and IORD instructions are not supported by the CS1W/CJ1W-NC271/471/F71 PCUs.
Summary of Contents for CJ1W-MA - REV 10-2008
