Omron CJ1W-MA - REV 10-2008, Operation Manual

Page: 552 / 644

525
List of Parameters Appendix B
Pn511 Input sig-
nal selec-
tion 5 2 1 EXT1 signal
input terminal
allocation 0 to 3 Always disabled. 8 --- --- Offline Stan-
dard
setting:
4
4 Allocated to CN1,
pin 44: Valid for low
input
5 Allocated to CN1,
pin 45: Valid for low
input
6 Allocated to CN1,
pin 46: Valid for low
input
7 Always enabled.
8 Always disabled.
9 to C Always disabled.
D Allocated to CN1,
pin 44: Valid for
high input
E Allocated to CN1,
pin 45: Valid for
high input
F Allocated to CN1,
pin 46: Valid for
high input
2 EXT2 signal
input terminal
allocation 0 to F Same as Pn511.1 8 --- --- Offline Stan-
dard
setting:
5
3 EXT3 signal
input terminal
allocation 0 to F Same as Pn511.1 8 --- --- Offline Stan-
dard
setting:
6
Pn512 Output sig-
nal reverse 2 0 Output signal
reverse for
CN1 pins 25,
26 0 Not reversed. 0 --- --- Offline ---
1 Reversed.
1 Output signal
reverse for
CN1 pins 27,
28 0, 1 Same as above 0 --- --- Offline ---
2 Output signal
reverse for
CN1 pins 29,
30 0, 1 Same as above 0 --- --- Offline ---
3 Not used. --- (Do not change the
setting.) 0 --- --- --- ---
Pn513 Input sig-
nal selec-
tion 6 2 0 Not used. 8 (Do not change the
setting.) 8 --- --- --- ---
1 Not used. 8 (Do not change the
setting.) 8 --- --- --- ---
2 Not used. 0 (Do not change the
setting.) 0 --- --- --- ---
3 Not used. 0 (Do not change the
setting.) 0 --- --- --- ---
Pn51A Motor-load
deviation
over level 2 Sets the allowable range for the number of pulses for
fully-closed encoders and semi-closed encoders. 0 Pulse 0 to
32767 Online ---
Pn51B Not used. --- (Do not change the setting.) 100 --- --- --- ---
Pn51C Not used. --- (Do not change the setting.) 450 --- --- --- ---
Pn51E Deviation
counter
overflow
warning
level 2 Sets the detection level for the deviation counter over-
flow warning. 0 % 0 to 100 Online ---
Param-
eter No.
Parame-
ter name
Param-
eter
size
Contents Default
setting
Unit Setting
range
Enable
setting Details
Digit
No.
Name Set-
ting Explanation