Omron CJ1W-MA - REV 10-2008, Operation Manual

Page: 540 / 644

513
List of Parameters Appendix B
R88D-WT
@
W-series Servo Drive Equipped with JUSP-NS115
Function Selection Parameters
Param-
eter No.
Parame-
ter name
Param-
eter
size
Contents Default
setting
Unit Setting
range
Enable
setting Details
Digit
No.
Name Set-
ting Explanation
Pn000 Function
selection
basic
switch 2 0 Reverse rota-
tion 0 CCW direction is
taken for positive
command. 0 --- --- Offline ---
1 CW direction is
taken for positive
command.
1 Not used. --- The setting is dis-
abled. (Do not
change the set-
ting.) 1 --- --- --- ---
2 Unit No. setting 0 to F Servo Drive com-
munications unit
number setting
when using per-
sonal computer
monitoring soft-
ware 0 --- --- Offline ---
3 Not used. 0 (Do not change the
setting.) 0 --- --- --- ---
Pn001 Function
selection
applica-
tion switch
1 2 0 Select stop if
an alarm
occurs when
Servomotor is
OFF 0 Servomotor
stopped by
dynamic brake. 2 --- --- Offline ---
1 Servomotor
stopped by
dynamic brake.
Dynamic brake
released after stop-
ping.
2 Servomotor
stopped with free
run.
1 Select stop
when prohib-
ited drive is
input 0 Stop according to
Pn001.0 settings
(release Servomo-
tor after stopping). 0 --- --- Offline ---
1 Stop Servomotor
using torque set in
Pn406, and lock
Servomotor after
stopping.
2 Stop Servomotor
using torque set in
Pn406, and release
Servomotor after
stopping.
2 Select AC/DC
power input 0 AC power supply:
AC power supplied
from L1, L2, (L3)
terminals 0 --- --- Offline ---
1 DC power supply:
DC power supplied
from +1,
−
termi-
nals
3 Select warning
code output 0 Alarm code only
output from ALO1,
ALO2, ALO3 1 --- --- Offline ---
1 Alarm code and
warning code both
output from ALO1,
ALO2, ALO3