753
Interrupt Control Instructions
Section 3-20
Reading I/O Interrupt Processing Rising/Falling Edge Designation
The relationship between interrupt input numbers and interrupt task numbers
is shown in the following table.
Reading Scheduled Interrupt Interval
Reading Scheduled Interrupt Present Value
Operand Specifications
Operand
Contents
N
Specify the interrupt input number.
10: Interrupt input 0
11: Interrupt input 1
12: Interrupt input 2
13: Interrupt input 3
D
Specify either the rising or falling edge of the interrupt input sig-
nal.
0000 hex: Rising edge
0001 hex: Falling edge
Interrupt input number
Interrupt task numbers
Interrupt input 0
140
CIO 296000
Interrupt input 1
141
CIO 296001
Interrupt input 2
142
CIO 296002
Interrupt input 3
143
CIO 296003
Operand
Contents
N
Specify the scheduled interrupt number.
4: Scheduled interrupt 0 (interrupt task 2)
5: Scheduled interrupt 1 (interrupt task 3)
D
0000: Scheduled interrupt disabled.
0001 to 270F hex:
Scheduled interrupt interval (1 to 9999)
Note The unit for the scheduled interrupt interval can be set to
either 10 ms or 1.0 ms in the PLC Setup interrupt settings.
For the CJ1M, 0.1 ms can also be set, in which case the
time will be 0005 to 270F hex (5 to 9999).
Operand
Contents
N
Specify the scheduled interrupt number.
14: Scheduled interrupt 0 (interrupt task 2)
15: Scheduled interrupt 1 (interrupt task 3)
D
Time from start of schedule
interrupt processing or time
from previous scheduled inter-
rupt.
10-ms unit: 0 to 99,990
1-ms unit: 0 to 9,999
0.1-ms unit: 0.0 to 999.9 (CJ1M
only)
0000 to 270F hex
Note: Even if the scheduled
interrupt is currently stopped,
the time that had expired
before it was stopped can be
read. If the scheduled interrupt
has not been started at all,
0000 hex will be returned.
Area
N
D
CIO Area
---
CIO 0000 to CIO 6143
Work Area
---
W000 to W511
Holding Bit Area
---
H000 to H511
Auxiliary Bit Area
---
A448 to A959
Timer Area
---
T0000 to T4095
Counter Area
---
C0000 to C4095
Summary of Contents for CJ1G-CPUxx
