182
Sequence Output Instructions
Section 3-4
Description
The functions of SETB(532) and RSTB(533) are described separately below.
Operation of SETB(532)
SETB(532) turns ON bit N of word D when the execution condition is ON. The
status of the bit is not affected when the execution condition is OFF. Unlike
SET, SETB(532) can turn ON a bit in the DM area or EM area.
Bits turned ON by SETB(532) can be turned OFF by any other instruction, not
just RSTB(533).
SETB(532) is supported by the CS1-H, CJ1-H, and CJ1M CPU Units only.
Operation of RSTB(533)
RSTB(533) turns OFF bit N of word D when the execution condition is ON.
The status of the bit is not affected when the execution condition is OFF. (Use
SETB(532) to turn ON the bit.) Unlike RST, RSTB(533) can turn OFF a bit in
the DM area or EM area.
Bits turned OFF by RSTB(533) can be turned ON by any other instruction, not
just SETB(532).
RSTB(533) is supported by the CS1-H, CJ1-H, and CJ1M CPU Units only.
Indirect DM/EM addresses in
BCD
*D00000 to *D32767
*E00000 to *E32767
*En_00000 to *En_32767
(n = 0 to C)
Constants
---
#0000 to #000F (binary)
or &0 to &15
Data Registers
DR0 to DR15
Index Registers
---
Indirect addressing using
Index Registers
,IR0 to ,IR15
–2048 to +2047, IR0 to –2048 to +2047, IR15
DR0 to DR15, IR0 to IR15
,IR0+(++) to ,IR15+(++)
,–(– –) IR0 to, –(– –) IR15
Area
D
N
ON
OFF
ON
OFF
15
This bit is turned ON.
Execution condition
Bit N of word D
ON
OFF
ON
OFF
15
This bit is turned OFF.
Execution condition
Bit N of word D
Summary of Contents for CJ1G-CPUxx
