Omron CJ1G-CPUxx, Instructions Manual

Page: 1126 / 1144

1105
CJ-series Instruction Execution Times and Number of Steps Section 4-2
4-2-28 Failure Diagnosis Instructions
Note When a double-length operand is used, add 1 to the value shown in the length
column in the following table.
4-2-29 Other Instructions
Note When a double-length operand is used, add 1 to the value shown in the length
column in the following table.
Instruction Mnemonic Code Length
(steps)
(See
note.)
ON execution time (
µ
s) Conditions
CPU6 @ H CPU4 @ H CPU4 @ CJ1M
FAILURE
ALARM FAL 006 3 15.4 16.7 16.7 26.1 Recording errors
179.8 244.8 244.8 294.0 Deleting errors (in order
of priority)
432.4 657.1 657.1 853.3 Deleting errors (all errors)
161.5 219.4 219.4 265.7 Deleting errors (individu-
ally)
SEVERE
FAILURE
ALARM FALS 007 3 --- --- --- --- ---
FAILURE
POINT
DETECTION FPD 269 4 140.9 202.3 202.3 220.7 When executed
163.4 217.6 217.6 250.3 First time
185.2 268.9 268.9 220.7 When executed
207.5 283.6 283.6 320.7 First time
Instruction Mnemonic Code Length
(steps)
(See
note.)
ON execution time (
µ
s) Conditions
CPU6 @ H CPU4 @ H CPU4 @ CJ1M
SET CARRY STC 040 1 0.06 0.06 0.12 0.15 ---
CLEAR CARRY CLC 041 1 0.06 0.06 0.12 0.15 ---
SELECT EM BANK EMBC 281 2 14.0 15.1 15.1 --- ---
EXTEND MAXIMUM
CYCLE TIME WDT 094 2 15.0 19.7 19.7 23.6 ---
SAVE CONDITION
FLAGS CCS 282 1 8.6 12.5 --- 14.2 ---
LOAD CONDITION
FLAGS CCL 283 1 9.8 13.9 --- 16.3 ---
CONVERT ADDRESS
FROM CV FRMCV 284 3 13.6 19.9 --- 23.1 ---
CONVERT ADDRESS TO
CV TOCV 285 3 11.9 17.2 --- 22.5 ---
DISABLE PERIPHERAL
SERVICING IOSP 287 --- 13.9 19.8 --- 21.5 ---
ENABLE PERIPHERAL
SERVICING IORS 288 --- 63.6 92.3 --- 22.2 ---