Mitsubishi Electric MELSERVO MR-J4-03A6-RJ, Instruction Manual

Page: 393 / 610

7. PARAMETERS
7 - 88
No./
symbol/name
Setting
digit
Function
Initial
value
[unit]
Control mode
CP/BCD
CL
PS
PT26
*TOP2
Function
selection T-2 _ _ _ x Electronic gear fraction clear selection
0: Disabled
1: Enabled
Selecting "Enabled" will clear a fraction of the previous command by the electronic
gear at start of the automatic operation.
Setting "2" or more to this digit will be "Disabled".
0h
_ _ x _ Current position/command position display selection
Select how to display a current position and command position.
0h
Setting
value
Displayed
data
Operation
mode
Status display
Current position
Command
position
_ _ 0 _
Positioning
display
Auto/Manual
Actual current
position will be
displayed as
machine home
position is 0. Command current
position will be
displayed as
machine home
position is 0.
_ _ 1 _
Roll feed
display
Auto
Actual current
position will be
displayed as
automatic
operation start
position is 0.
When ST1
(Forward rotation
start) or ST2
(Reverse rotation
start) is turned on,
counting starts
from 0 and a
command current
position to the
target position will
be displayed.
When a stop, a
point table
command
position for the
point table
method will be
displayed and 0
will be
continuously
displayed for the
program method.
Manual
0 will be
continuously
displayed.
This digit will be disabled when [degree] of "Position data unit" is set in
[Pr. PT01]. Additionally, setting "2" or more will be "positioning display".
_ x _ _ For manufacturer setting 0h
x _ _ _ Mark detection function selection
0: Current position latch function
1: Interrupt positioning function (Note)
0h
Note. The interrupt positioning function is available with servo amplifiers with software
version B7 or later.
PT27
*ODM
Operation
mode
selection _ _ _ x For manufacturer setting 0h
_ _ x _ Manual operation method selection
0: Station JOG operation
1: JOG operation
0h
_ x _ _ For manufacturer setting 0h
x _ _ _ 0h
www.kavrammuhendislik.com.tr