Mitsubishi Electric MELSERVO MR-J4-03A6-RJ, Instruction Manual

Page: 118 / 610

3. DISPLAY AND OPERATION SECTIONS
3 - 45
(2) Operation method
(a) Parameters of 3 or less decimal digits.
The following example gives the operation procedure to change [Pr. PA Reverse rotation torque
limit].
Press the "MODE" button to switch to the basic setting parameters screen.
Parameter number selection
Select a parameter number with the "UP" or "DOWN" button.
Press the "SET" button to display the item to be set to the selected
parameter number.
Displaying the parameter contents
Press the "UP" or "DOWN" button to shift to the setting display of the next
parameter number.
Press the "MODE" button to shift to the next display.
Press the "SET" button once to display the setting.
Press the "SET" button once when the setting is displayed. The setting
flickers and is possible to be changed.
Changing the parameter contents
Press the "UP" or "DOWN" button to change the value and press the "SET"
button to fix the setting. The setting will be displayed as it is after the setting
is fixed.
To cancel the setting data, press the "MODE" button for 2 s while the display
is flickering. The setting before the change will be displayed.
Press and hold the "UP" or "DOWN" button to change the data continuously.
In that case, only the highest digit changes.
Example of pressing and holding the "UP" button
The first digit increases
from 0 to 9.
The first digit does not
change from 0. The
second digit increases
from 0 to 9.
The first and second
digits do not change
from 0. The third digit
increases from 0 to 9.
Example of pressing and holding the "DOWN" button
The first digit decreases
from 9 to 0.
The first digit does not
change from 0. The
second digit decreases
from 9 to 0.
The first and second
digits do not change
from 0. The third digit
decreases from 9 to 0.
www.kavrammuhendislik.com.tr