737 MAX Flight Crew Operations Manual
Normal Procedures -
Amplified Procedures
MN-FLT-OH-201
NP.21.30
Before start procedures
Objective: to configure the aircraft for each flight.
Threats and errors associated with this phase of flight are:
• Time pressure;
• MCP setting;
• Flight documentation;
• Minimum Equipment List (MEL) items;
• Rhyming rejected takeoff briefing;
• OPT last minute changes.
These items are not limited to and pilots are expected to anticipate any
threat.
On through flight procedures, verify:
• IRS alignment procedure is completed.
• Oxygen pressure;
• Hydraulic quantity;
• Engine oil quantity.
Scan flow must be made to ensure proper systems configuration.
Crew may anticipate the following actions however must check data when
flight planning is available.
Cabin pressurization panel . ................................................ Set (F/O)
FLIGHT ALTITUDE indicator - Set
Set cruise altitude.
LANDING ALTITUDE indicator - Set
Set destination field elevation.
Note:
if airport elevation is above 6.000 ft check the
Supplementary Procedures.
IGNITION select switch . ..............................................IGN R (F/O)
Alternate the ignition select switch on each flight.
March 1, 2021