737 MAX Flight Crew Operations Manual
Flight Management, Navigation -
FMC Descent and Approach
11.43.14
MN-FLT-OH-201
1
STARS
Displays the selected STAR.
2
Arrival Transitions (TRANS)
Displays all arrival transitions related to the selected STAR.
3
Selected Status Label (<SEL>)
Identifies arrival/approach procedures or a runway which has been selected for
entry into the route, but not executed.
All <SEL> entries propagate to the MOD RTE and MOD RTE LEGS pages for
subsequent execution.
4
Approach and Runway (APPROACHES, RUNWAYS)
Displays all approaches related to the selected STAR, followed by all related
runways (unless the desired approach/runway was selected on the initial display).
5
Arrival Transition (TRANS)
Displays the selected arrival transition.
6
APPROACHES
Displays selected approach/runway.
7
Approach Transition (TRANS)
Displays all approach transitions related to the selected approach.
8
Active Status Labels (<ACT>)
Following execution of the selected entries, the arrival/approach procedures and
runway are identified as active.
Note:
For an existing active route, the execute key illuminates upon STAR or
approach/runway selection. Following selections, the ERASE prompt is
available. Selections should be executed on the RTE or RTE LEGS pages
after linking any route discontinuities.
1B785, 1B786, 1J585 - 1J594
9
Glideslope (G/S)
Toggles glideslope ON and OFF for the selected or active approach.
When an ILS or IGS approach is selected in the FMC, G/S defaults to ON.
When a LOC, SDF, LDA or BCS approach is selected in the FMC, G/S defaults
to OFF.
March 1, 2021
