737 MAX Flight Crew Operations Manual
Normal Procedures -
Amplified Procedures
MN-FLT-OH-201
NP.21.15
Standby instruments (as installed) ........................................... Check
Standby horizon ....................................................................... Set
Gyro caging control ...................................... Pull, then release
Approach mode selector ................................................... OFF
Verify that the flight instrument indications are correct.
Verify that no flags are shown
Standby altimeter ..................................................................... Set
Verify that the flight instrument indications are correct.
Verify that no flags are shown.
Integrated standby flight display (as installed) ............................. Set
Verify that the approach mode display is blank.
Set the altimeter.
Verify that the flight instrument indications are correct.
Verify that no flags or message are shown.
-700 and -800 Fleets Only
Standby RMI ................................................................................. Set
Select either VOR or ADF.
SPEED BRAKE lever ................................................. DOWN detent
Verify that the SPEED BRAKE ARMED light is extinguished.
Verify that the SPEED BRAKE DO NOT ARM light is
extinguished
Verify that the SPEED BRAKE EXTENDED light is
extinguished.
Note:
to ensure the SPEED BRAKE is properly stowed, push
down firmly on top of the speed brake handle.
Reverse thrust levers .................................................................Down
Forward thrust levers .............................................................. Closed
FLAP lever .................................................................................... Set
Set the flap lever to agree with the flap position.
Parking brake ................................................................................ Set
Set the parking brake OFF if the aircraft is on chocks.
March 1, 2021