737 MAX Flight Crew Operations Manual
Flight Instruments, Displays -
MAX Display System – Controls
and Indicators
10.15.2
MN-FLT-OH-201
4
Meters (MTRS) Switch (momentary action)
PUSH – displays altitude indications in meters.
5
Barometric (BARO) Reference Selector (outer) (two position)
IN – selects inches of mercury as the barometric altitude reference.
HPA – selects hectopascals as the barometric altitude reference.
6
Barometric (BARO) Selector (middle) (slew)
ROTATE –
• adjusts the barometric altitude setting on the altitude tape
• if STD displayed, adjusts the preselected BARO reference.
7
Barometric (BARO) Standard (STD) Switch (inner) (momentary
action)
PUSH –
• selects the standard barometric setting (29.92 inches Hg/1013 HPA) for
barometric altitude reference
• if STD is displayed, selects the preselected barometric reference
• if no preselected barometric is displayed, displays the last value before
STD was selected.
8
Flight Path Vector (FPV) Switch (momentary action)
PUSH – displays flight path vector on the attitude indicator.
9
Vertical Situation Display (VSD) Switch (momentary action)
PUSH – turns on the VSD inset on the Expanded MAP and Center Map modes on
the ND. Pressing the VSD switch again will deselect the VSD. If the VSD switch
is selected when the ND mode is not MAP, MDS will arm the VSD for display
when the MAP mode is displayed.
March 1, 2021
