737 MAX Flight Crew Operations Manual
Supplementary Procedures -
Flight Management, Navigation
SP.11.18
MN-FLT-OH-201
EXEC key ........................................................................................ Push
Observe MOD RTE LEGS page changes to ACT and restriction is
deleted and replaced with an FMC predicted value (small size
characters).
Changing Speed and/or Altitude Restriction during Climb or
Descent
CLB/DES page............................................................................... Select
Push DEL key to enter DELETE in the scratch pad, or key–in the
desired speed and altitude in the scratch pad. Line select to the SPD
REST line.
EXEC key ........................................................................................ Push
Observe the MOD CLB or the MOD DES page changes to ACT and
the restriction is changed or deleted.
Changing Climb/Cruise/Descent Speed Schedule
CLB/CRZ/DES page ...................................................................... Select
Select the prompt for the desired climb/cruise/descent schedule, or
key–in the desired speed in the scratch pad and line select to the TGT
SPD line.
EXEC key ........................................................................................ Push
Observe the MOD CLB, MOD CRZ, or MOD DES page changes to
ACT and new speed schedule is specified.
Early Descent
MCP altitude selector ..........................................................................Set
Set next level–off altitude.
DES page........................................................................................ Select
Line select DES NOW prompt.
EXEC key ........................................................................................ Push
Observe MOD DES page changes to ACT. Observe descent is
initiated (if VNAV engaged).
Note:
For a PATH DES, this will result in a 1000 FPM rate of
descent until the planned path is intercepted. For a SPD
DES, this will result in an idle thrust normal rate of descent.
March 1, 2021