B-18 Page 14 of 22
MN-FLT-OH-201
Flight Crew Operations Manual Bulletin No. GOT-18 , Dated March 1, 2021 (continued)
Stabilizer Trim (continued)
Manual stabilizer control is accomplished through cables which allow the pilot to
position the stabilizer by rotating the stabilizer trim wheels. The stabilizer is held
in position by two independent brake systems. Manual rotation of the trim wheels
can be used to set the desired stabilizer position, after the STAB TRIM cutout
switches have been placed in the CUTOUT position. The effort required to
manually rotate the stabilizer trim wheels may be higher under certain flight
conditions such as at high airspeeds. Grasping the stabilizer trim wheel will stop
stabilizer motion.
March 1, 2021
