737 MAX Flight Crew Operations Manual
Normal Procedures -
Amplified Procedures
MN-FLT-OH-201
NP.21.58
Close - In Turn Takeoff
Perform this specific procedure only when a turn is to be made after
departure, and there is a concern to radius distance limit during this turn.
If a close-in turn takeoff will be made, do not arm VNAV.
Initial heading - set
Set runway heading, unless otherwise directed.
Initial altitude - set.
Pilot Flying
Pilot Monitoring
Above 400 ft
Request HDG SEL
Verify FMA
Autopilot may be selected ON
Set “Autopilot CMD”
Select the HDG SEL roll mode
Inform FMA
Verify and Inform “Autopilot CMD”
Thrust Reduction / Acceleration Altitude
At Thrust Reduction Altitude call “SET
CLIMB THRUST”.
Above 800 ft AFE, request: “N1” or
monitor FMA for automatic climb thrust
setting
Set or Monitor Climb Thrust as
requested
Inform “CLIMB THRUST SET”
Select N1 or Inform FMA.
When approximately 30° to the desired heading
Request or select: VNAV or “Set flaps
up speed”
Request Flap retraction on schedule.
Speed Bug to desired Speed
Position flap as directed.
Monitor Flap/Slat retraction.
Inform each new position.
After flap retraction is complete verify
engine bleeds and air conditioning packs
are operating
After Flaps are UP
March 1, 2021