737 MAX Flight Crew Operations Manual
Supplementary Procedures -
Flight Management, Navigation
MN-FLT-OH-201
SP.11.11
EXEC key illuminates when data has been entered into all box
prompts.
EXEC key .........................................................................................Push
Repeat above steps to define additional created waypoints as desired.
To enter a new identifier in the same category, simply overwrite the
previous identifier.
Note:
To enter a created waypoint into the flight plan, key the
identifier into the scratch pad and follow the route
modification procedure.
Deleting Created Waypoints on the Nav Data Pages
INIT/REF key ...................................................................................Push
Observe the INDEX prompt displayed.
INIT/REF INDEX page..................................................................Select
Observe the NAV DATA prompt displayed. To access the SUPP NAV
DATA page, key SUPP into the scratch pad.
NAV DATA page ............................................................................Select
Enter the identifier on either the WPT IDENT, NAVAID IDENT, or
AIRPORT IDENT line, as appropriate.
Data................................................................................................ Delete
Push the DEL key and then line select the identifier. Observe the
EXEC key illuminates.
EXEC key .........................................................................................Push
Data previously entered is deleted. Observe NAV DATA page
displayed with prompts.
Entering a Crossing Radial (Bearing) or Distance from a Fix as
a Route Waypoint
FIX INFO page ...............................................................................Select
Enter identifier of the reference waypoint (normally an off–route
waypoint) onto the FIX line. Enter the desired radial or distance from
the FIX on a RAD/DIS line, or line select the ABM prompt if the
desired radial or distance from the FIX is perpendicular to the present
route/course.
March 1, 2021
