737 MAX Flight Crew Operations Manual
Supplementary Procedures -
Flight Management, Navigation
MN-FLT-OH-201
SP.11.7
Route Copy
YA601 - YA648, YA657, YA683, YB111 - YB119, YC095, YC453, YC573, YD256, YF631 - YF801, YK721 - YK728, YK730 - YK737, YK739, YK740, YK751, YK752, YK758, YK760 - YK762, YK764 - YK767, YK769, YK770, YL801 - YL809, YL811 - YL813, YL815 - YN109, YN261 - YN702, YR602 - YR617, YR619, YR624, YR626 - YR628, YR630, YR631, YR634 - YR661,
YR663 - YV671
(SB Changes YK753 - YK756, YL621)
ACT RTE x LEGS or ACT RTE x page .........................................Select
RTE COPY line select key ...............................................................Push
Inactive Route Activation
YA601 - YA648, YA657, YA683, YB111 - YB119, YC095, YC453, YC573, YD256, YF631 - YF801, YK721 - YK728, YK730 - YK737, YK739, YK740, YK751, YK752, YK758, YK760 - YK762, YK764 - YK767, YK769, YK770, YL801 - YL809, YL811 - YL813, YL815 - YN109, YN261 - YN702, YR602 - YR617, YR619, YR624, YR626 - YR628, YR630, YR631, YR634 - YR661,
YR663 - YV671
(SB Changes YK753 - YK756, YL621)
RTE x LEGS or RTE x page...........................................................Select
ACTIVATE line select key ...............................................................Push
Correct any ROUTE DISCONTINUITY.
EXEC key .........................................................................................Push
Route Removal
RTE page ........................................................................................Select
ORIGIN ........................................................................................... Enter
If EXEC key illuminates
EXEC key ...............................................................................Push
Linking a Route Discontinuity
Correct the ROUTE DISCONTINUITY by entering or deleting
waypoints in a sequence that provides a continuous flight–plan path.
EXEC key .........................................................................................Push
Observe MOD RTE or MOD RTE LEGS page changes to ACT.
Determining ETA and Distance to Cross Radial (Bearing) or
Distance from a Fix
FIX INFO page ...............................................................................Select
Enter the identifier of the reference waypoint (normally an off–route
waypoint) onto the FIX line. Enter the desired radial or distance from
the FIX on a RAD/DIS line, or line select the ABM prompt if the
desired radial from the FIX is perpendicular to the present
route/course.
Time and distance to go ................................................................. Check
Check ETA and DTG, as desired.
March 1, 2021
