manualshive.com logo in svg

Atmel SAM4S Series, Preliminary Data Sheet

The Atmel SAM4S Series, a powerful microcontroller product line, offers unparalleled performance and versatility for various applications. Discover the extensive range of features and functionalities provided in the convenient "Preliminary Data Sheet" and user "manual," available for free download on our website. Enhance your projects with ease and efficiency today.

Share
Download
background image

873

11100B–ATARM–31-Jul-12

SAM4S Series [Preliminary]

36.9

SD/SDIO Card Operation

The High Speed MultiMedia Card Interface allows processing of SD Memory (Secure Digital
Memory Card) and SDIO (SD Input Output) Card commands.

SD/SDIO cards are based on the Multi Media Card (MMC) format, but are physically slightly
thicker and feature higher data transfer rates, a lock switch on the side to prevent accidental
overwriting and security features. The physical form factor, pin assignment and data transfer
protocol are forward-compatible with the High Speed MultiMedia Card with some additions. SD
slots can actually be used for more than flash memory cards. Devices that support SDIO can
use small devices designed for the SD form factor, such as GPS receivers, Wi-Fi or Bluetooth
adapters, modems, barcode readers, IrDA adapters, FM radio tuners, RFID readers, digital cam-
eras and more.

SD/SDIO is covered by numerous patents and trademarks, and licensing is only available
through the Secure Digital Card Association.

The SD/SDIO Card communication is based on a 9-pin interface (Clock, Command, 4 x Data
and 3 x Power lines). The communication protocol is defined as a part of this specification. The
main difference between the SD/SDIO Card and the High Speed MultiMedia Card is the initial-
ization process.

The SD/SDIO Card Register (HSMCI_SDCR) allows selection of the Card Slot and the data bus
width.

The SD/SDIO Card bus allows dynamic configuration of the number of data lines. After power
up, by default, the SD/SDIO Card uses only DAT0 for data transfer. After initialization, the host
can change the bus width (number of active data lines).

36.9.1

SDIO Data Transfer Type

SDIO cards may transfer data in either a multi-byte (1 to 512 bytes) or an optional block format
(1 to 511 blocks), while the SD memory cards are fixed in the block transfer mode. The TRTYP
field in the HSMCI Command Register (HSMCI_CMDR) allows to choose between SDIO Byte or
SDIO Block transfer.

The number of bytes/blocks to transfer is set through the BCNT field in the HSMCI Block Regis-
ter (HSMCI_BLKR). In SDIO Block mode, the field BLKLEN must be set to the data block size
while this field is not used in SDIO Byte mode.

An SDIO Card can have multiple I/O or combined I/O and memory (called Combo Card). Within
a multi-function SDIO or a Combo card, there are multiple devices (I/O and memory) that share
access to the SD bus. In order to allow the sharing of access to the host among multiple devices,
SDIO and combo cards can implement the optional concept of suspend/resume (Refer to the
SDIO Specification for more details). To send a suspend or a resume command, the host must
set the SDIO Special Command field (IOSPCMD) in the HSMCI Command Register.

36.9.2

SDIO Interrupts

Each function within an SDIO or Combo card may implement interrupts (Refer to the SDIO
Specification for more details). In order to allow the SDIO card to interrupt the host, an interrupt
function is added to a pin on the DAT[1] line to signal the card’s interrupt to the host. An SDIO
interrupt on each slot can be enabled through the HSMCI Interrupt Enable Register. The SDIO
interrupt is sampled regardless of the currently selected slot.

Summary of Contents for SAM4S Series












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SAM4S Series

Hardi HC5500 Quick Manual preview
HC5500
Brand: Hardi Pages: 2
YASKAWA CC-Link Technical Manual preview
CC-Link
Brand: YASKAWA Pages: 64
National Instruments RMC-8354 User Manual preview
RMC-8354
Brand: National Instruments Pages: 102
NAU ROBOTICS RC40A Operating Instruction preview
RC40A
Brand: NAU ROBOTICS Pages: 109
Native Instruments Maschine Mikro MK2 Getting Started preview
Maschine Mikro MK2
Brand: Native Instruments Pages: 181
Vacon 100X series Installation, Technical And Maintenance Manual preview
100X series
Brand: Vacon Pages: 132
Sunnen HTA-2000 (2M) Manual preview
HTA-2000 (2M)
Brand: Sunnen Pages: 24
Renogy Rover 100A Manual preview
Rover 100A
Brand: Renogy Pages: 36
Fairford Synergy SGY-101 Quick Start Manual preview
Synergy SGY-101
Brand: Fairford Pages: 20
ST UM1932 User Manual preview
UM1932
Brand: ST Pages: 40
Varian 969-9507 Instruction Manual preview
969-9507
Brand: Varian Pages: 37
Danfoss PVE Series Installation Manual preview
PVE Series
Brand: Danfoss Pages: 6
Davey Torrium2 Installation And Operating Instructions Manual preview
Torrium2
Brand: Davey Pages: 8
Instrutech VGC301A User Manual preview
VGC301A
Brand: Instrutech Pages: 34
Infineon XDPL8220 Getting Started preview
XDPL8220
Brand: Infineon Pages: 14
Keysight N4965A Getting Started Manual preview
N4965A
Brand: Keysight Pages: 22
Ametek SCZF1 SSR Series Instruction, Operation And Maintenance Manual preview
SCZF1 SSR Series
Brand: Ametek Pages: 24
ST VL53L4CD User Manual preview
VL53L4CD
Brand: ST Pages: 22

Brands by name

Popular brands

Load more brands