![Atmel SAM4S Series Preliminary Data Sheet Download Page 752](http://html1.mh-extra.com/html/atmel/sam4s-series/sam4s-series_preliminary-data-sheet_3003408752.webp)
752
11100B–ATARM–31-Jul-12
SAM4S Series [Preliminary]
34.7.3.12
Framing Error
The receiver is capable of detecting framing errors. A framing error happens when the stop bit of
a received character is detected at level 0. This can occur if the receiver and the transmitter are
fully desynchronized.
A framing error is reported on the FRAME bit of the Channel Status Register (US_CSR). The
FRAME bit is asserted in the middle of the stop bit as soon as the framing error is detected. It is
cleared by writing the Control Register (US_CR) with the RSTSTA bit to 1.
Figure 34-25. Framing Error Status
34.7.3.13
Transmit Break
The user can request the transmitter to generate a break condition on the TXD line. A break con-
dition drives the TXD line low during at least one complete character. It appears the same as a
0x00 character sent with the parity and the stop bits to 0. However, the transmitter holds the
TXD line at least during one character until the user requests the break condition to be removed.
A break is transmitted by writing the Control Register (US_CR) with the STTBRK bit to 1. This
can be performed at any time, either while the transmitter is empty (no character in either the
Shift Register or in US_THR) or when a character is being transmitted. If a break is requested
while a character is being shifted out, the character is first completed before the TXD line is held
low.
Once STTBRK command is requested further STTBRK commands are ignored until the end of
the break is completed.
The break condition is removed by writing US_CR with the STPBRK bit to 1. If the STPBRK is
requested before the end of the minimum break duration (one character, including start, data,
parity and stop bits), the transmitter ensures that the break condition completes.
56000
18
1 170
57600
17
1 138
200000
5
328
Table 34-11. Maximum Time-out Period (Continued)
Baud Rate
Bit Time
Time-out
D0
D1
D2
D3
D4
D5
D6
D7
RXD
Start
Bit
Parity
Bit
Stop
Bit
Baud Rate
Clock
Write
US_CR
FRAME
RXRDY
RSTSTA = 1
Summary of Contents for SAM4S Series
