IDA8 Global-Net User Manual
474
© 2017, ATEÏS, member of PAX ProAV Group
Control Window
Elements
High Time(sec)/Lo Time(sec): The Hi time and Lo
time of output pulse.
Count: Set the number of pulse time.
C Pin (Clear): If you want to stop and clear the
setting of pulse count from [Count] function, the C
Pin will trigger a raising edge. Once the pin is
triggered, the number of count will be cleared as 0
(The count will remains back to the same counts on
Control window for the next time).
5.14
Meter-Peak/RMS Meter
Display the amplitude of the incoming audio signal. There are two approaches available for measuring
the signal. The first one is RMS which is often used to measure complex waveforms especially for non-
repeating signals like noises. The other is Peak approach.
