Ateis IDA8 Series User Manual Download

Page: 285 / 559

Product Features

285

Daily/Monthly/Yearly: Trigger this Scheduler event every day/every month/every year.

Weekly: Trigger this Scheduler event weekly, you can choose the weekdays.

If you want to repeat two or more days monthly or yearly, please set another scheduler.

Repeat On: Tick the checkbox to select the repeating date.

End Time: Set the ending time of this scheduler.

Summary: Memo area.

Here you can check the scheduler events you have created. Click the content for editing or to delete.

Display the scheduler events which are sent from TerraServer.

3.2.10.4.4 Update (Firmware/Configuration/GUI/Reboot)

Firmware: Click [Browse] button to upload a firmware file.

Reverse Setting: Click [Reverse] button to download the configuration backup file to your PC/Laptop.

Store: Click [Browse] button to select a configuration file and store into the current configuration.

Configuration: It will create a file with .sql extension in PC.

GUI (PPM-IT5): Allow to change the font size and language of the main buttons. The new settings on

PPM-IT5 will be changed after rebooting.

Summary of Contents for IDA8 Series
















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IDA8 Series

Reviews:

Related manuals for IDA8 Series

Brands by name

Popular brands

Ateis IDA8 Series, User Manual

Search results

Summary of Contents for IDA8 Series

Reviews:

Related manuals for IDA8 Series

Brands by name

Popular brands