DSP Components
513
© 2017, ATEÏS, member of PAX ProAV Group
[VoIP Receive]-Setting
Server:
IP: The connected IP of SIP server.
RTP Port: The port that is using for
streaming.
SIP Port: The port that is using via SIP
protocol.
Codec: The format that is using for
streaming.
Buffer: The delay time of streaming.
Account:
User: The calling name(text or telephone
number) can be user-defined.
Password: The password that is using to
connected to SIP server.
RU SEC User: The calling name(text or
telephone number) of the secondary unit
when using redundant configuration.
RU SEC Password: The password of
secondary unit when using redundant
configuration using to connected to the SIP
server.
Paging: With the element of network paging,
users can multi-paging through calling.
Answer Behavior: Select the ring tone time before
the call picks up automatically. Select manual
mode to manually pick up the call by clicking [
] Call button.
Call: Click to dial the call/receive the call.
Cancel/Hang up: Click to cancel/hang up the
call.
Telephone Book: Click to open [Contact
Manager] window and choose the contacts.
Identifier: Enter/display the SIP IP call. The format
is "[phone number]@[IP address]:[SIP port]"
5.26.3 VoIP DTMF Paging
This function require you to enter the DTMF codes, allowing to paging to multiple zones whenever
there's any emergency happens and messages must be paging. Once you have entered the DTMF code,
it will be automated into the dial command and activate the paging.
Before proceeding the DTMF paging,
make sure the connection between
each component has fully connected
with.