System Functionality
351
© 2017, ATEÏS, member of PAX ProAV Group
4.3.2
Value Trigger
This event is used for controlling the element values by the state count for triggering the event.
Click [Add] to create a new event, and a pop-up setting
window will be displayed, here you can choose which
kinds of event users acquired. Select [Value Trigger]
option on [Type] drop-down box, then press [OK].
Event Settings
After creating a Value Trigger event, users
need to assign an element to it.
1. Right click the desired element, and click
the options [Event > Value Trigger > XXX]
which XXX is the name of the event. See the
picture on the right.
2. There will be a window which displays the
event information corresponded to the state
and value.
3. Click [Content...] button on Event Manager window to open the settings window of event.
State: Click [State] page tab to switch the state of value trigger event.
Element: The element of the component controlled by value trigger.
Component: The component of device contains the previously element.
Device/System: The device/system contains the previously component.
Value: The value that binds with the state. When a Value Trigger Event has been triggered, the source
that triggers the event will send a state number to the system and the event will map this state
