Ateis IDA8 Series User Manual Download

Page: 92 / 559

IDA8 Global-Net User Manual

3.1.9.1.36 Net Blacklist

The communication of IDA8 is unstable.

Indication:

LED Indicator: When this error is detected, the following LEDs will light up:

G. Fault LED on the front panel of the IDA8C/S.

Log:

A text message displays at the touch screen of the IDA8C:

"Net Blacklist"

A text message displays at the window [Machine Fault Record] in Ateis Studio:

Troubleshooting: Please catch and save the record of this IDA8 logs and send to the engineers

3.1.9.1.37 Fan Error

The fan in IDA8 breaks down.

Indication:

LED Indicator: When this error is detected, the following LEDs will light up:

G. Fault LED on the front panel of the IDA8C/S.

Log:

A text message displays at the touch screen of the IDA8C:

"Fan Error"

A text message displays at the window [Machine Fault Record] in Ateis Studio:

Troubleshooting: Please replace the new fan.

3.1.9.2

Table of System Faults

Name

Description

Detail

Solution Way

SSI Error

Audio board control has

failed.

Replace the Machine

No Para. Table.

The IDA8 can't find the

DSP parameters.

Re-store again

Flash Error

I2C Z LED No Response

I2C Z LED Driver Error

I2C Z LED Compare Error

I2C LOGICOUT POWER FAN

UEVM No Response

I2C LOGICOUT POWER FAN

UEVM Driver Error

I2C LOGICOUT POWER FAN

UEVM Compare Error

I2C EVACU IN No Response

I2C EVACU IN Driver Error

I2C EVACU IN Compare Error

An error occurred in the

Nand flash inside

IDA8C/S.

NAND flash access fault

for IDA8C(256MB) or

IDA8S(128MB)

Replace the Machine

Summary of Contents for IDA8 Series
















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IDA8 Series

Reviews:

Related manuals for IDA8 Series

Brands by name

Popular brands

Ateis IDA8 Series, User Manual

Search results

Summary of Contents for IDA8 Series

Reviews:

Related manuals for IDA8 Series

Brands by name

Popular brands