Product Features
195
© 2017, ATEÏS, member of PAX ProAV Group
Fault LED:
Display fault status of system. Following table list the states of fault:
Status
Frequency
Activity
Permanent
There are faults in audio processor.
Blinking
°
°
Lost communication with audio processor.
EVAC LED:
Status
Frequency
Activity
Permanent
System is under evacuation paging.
Blinking
°
°
PPM-AS does not do a "Plug-in" in Ateis Studio before using.
"Remote Plug-in" makes audio processor to recognize the peripheral devices.
Power LED:
Light up when the PPM-AS is powered on.
Hold LED:
These LEDs Indicate which keys are selected.
Event Select Key:
These buttons are used to select keys, each key may link to an event for triggering actions like
paging or adjust the value of parameters.
All/Release LED:
This indicator lights up if all keys are selected.
All/Release Button:
This button is used to select or deselect all keys.
Talk Key:
Push this key to request paging.
Talk Indicator:
Light up if PPM-AS is allowed to paging, on the other word, the paging request has been
acknowledged.
Sometimes even the paging request is granted, zones under paging still can be occupied by
other sources with higher priority. In the event of, the talk LED still lights up, you can check it from
busy LEDs.
Busy LED:
Show the status of zone:
Color
Status
Frequency
Activity
Red
Permanent
Priority of the zone is lower than other sources.
Green
Blinking
°
°
The zone only desired for paging is not using by other
sources.
Green
Permanent
Priority of the zone is higher than other sources.
