IDA8 Global-Net User Manual
516
© 2017, ATEÏS, member of PAX ProAV Group
dialing.
5.27
Voxnet Control
This component is a bridge between the Ateis device and the Voxnet device. It maps the key in Voxnet
protocol to the code in an event for paging control. Note: The [Voxnet Control] component will
occupied with 2 x message channels, please refer to [
] chapter.
Setting Window
There are two channels for paging with Voxnet source.
Paging Event: Set the paging event to bind with the
Voxnet source.
Key: The key of Voxnet protocol.
Value: Set the code mapped to the key. Each code
represents a zone selection combined for paging.
All: Selects all the zones.
Zone Selection: Select a zone for paging.
5.28
Custom Component-Initial
When the DSP component configuration is complex, the Initial component provides another new
configuration window to put any component into it, allowing to see the connected components and pins
clearly.
