IDA8 Global-Net User Manual
238
© 2017, ATEÏS, member of PAX ProAV Group
After power up, you'll the a message on the top
of LCD screen: "No Preset". It means the URC-200
now is forbidden to run the configuration. And
then you can save another configuration for the
device to make it working.
3.2.9.3
Maintenance
This topic contains the knowledge about the update procedure and inner settings of devices. For
example the IP settings.
3.2.9.3.1 Update Firmware
Please follow the steps below to update the firmware of URC-200:
1. Run the software and search URC-200. Click
[Network] page. Set the network interface card that
communicate with URC-200. After the network
interface card is selected, the IP address is refreshed
automatically.
2. Click [Remote Device] page. This page lists all
devices in the network. Press [Search] to discovery
URC-200s throughout the network.
3. The result of search will displayed as the picture at
the right. In the [Devices] field, devices are
represented using a tree, each leaf node of the tree
is a device. The URC-200 is one of them in the grid.
4. There is a box [Function List] at the right side of the
window. By select the entry of the grid, the items
inside the box changes accordingly to list all the
functions that the device provide. Select entry
[CR200], and then click the [Update] in the [Function
List] box to open the update window.
