System Functionality
353
© 2017, ATEÏS, member of PAX ProAV Group
This action only removes the relation between the element and event and does not delete the
element.
Clear: Remove all elements controlled by the event.
4.3.4
Push Control
This event is used for controlling the event button on the paging consoles. To trigger the button, push
and hold the button.
Click [Add] to create a new event, and a pop-up setting
window will be displayed, here you can choose which
kinds of event users acquired. Select [Push Control] option
on [Type] drop-down box, then press [OK].
Event Settings
After creating a Push Control event, users need
to assign an element to it.
1. Right click the desired element, and click
the options [Event > Value Control > XXX]
which XXX is the name of the event. See the
picture on the right.
2. Click [Content...] button on Event Manager
window to open the settings window of
event.
3. On the right side of window, there is a knob to simulate the source that triggers the event. The value
of elements will also be changed if adjusting the knob.
Control Type: This control option determines the type of knob simulation.
Value: Adjust the value of elements by native value.
Percent: Adjust the value of elements by percentage.
Element: The element of the component controlled by value trigger.
Component: The component of device contains the previously element.
Device/System: The device/system contains the previously component.
Max/Min: The maximum/minimum value of the simulating knob.
