DSP Components
473
© 2017, ATEÏS, member of PAX ProAV Group
o
Open(Lo): Normally open, close the contact to the output signal.
o
Close(Hi): Normally close, open the contact to the output signal.
Status: Show states of the external device. There are four states:
o
Open: An open circuit of external device is detected.
o
Short: A short circuit of external device is detected.
o
Activate: The logic output is active.
o
Deactivate: The logic output is deactivated.
5.13.26 Pause Generator
5.13.26.1 Control
The Pulse Generator Control component is a component which gives pulse. Note: The connected input
pin is a high active pin and gives pulse when deactivating.
Control Window
Elements
High Time(sec)/Lo Time(sec): The Hi
time and Lo time of output pulse.
5.13.26.2 Trigger
The Pulse Generator Control component is a component which gives pulse, and can also set the number
of pulse time. Note: The connected input pin will be triggered and give pulse when it's in raising edge.
