Ateis IDA8 Series User Manual Download

Page: 194 / 559

IDA8 Global-Net User Manual

194

distance of 300m on a single CAT-5 cable (FTP/STP) and makes each station easy to connect by using

standard RJ45 connectors and the junction connection box (supplied with PPM). If Power over Ethernet is

not available, or the CAT-5 cable is over 50m long, the console can be powered locally with 24V DC

supply.

Features

Desktop enclosure

Monitored CAT-5 link to controllers and slaves

Supervision of microphone capsule (not on slave units)

Automatic gain control on microphone input

8-zone selection keys (Expandable with additional keypads)

All-call key

Power indicator

EVAC indicator

Status and fault indicator

Monitor speaker

3.2.5.1

Control Panel

Microphone:

The sleek condenser gooseneck microphone. This unidirectional condenser microphone warrants

high quality directive signal pick up from the user and hence less interference from the

surroundings.

Monitoring Speaker:

This embedded speaker to play chime when paging or monitor signal from audio processor, it needs

to work with rs485 output component to get audio signal from other DSP components in audio

processor.

Summary of Contents for IDA8 Series
















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IDA8 Series

Reviews:

Related manuals for IDA8 Series

Brands by name

Popular brands

Ateis IDA8 Series, User Manual

Search results

Summary of Contents for IDA8 Series

Reviews:

Related manuals for IDA8 Series

Brands by name

Popular brands