Product Features
251
© 2017, ATEÏS, member of PAX ProAV Group
Audio Out 1 Active: The triggered incidents for Audio Out 1 & 2. It can be Command(String), Logic
Out, Multi Function.
Audio Out 1 Hold Time: The hold time of the first audio output and the secondary output.
Audio Out 1 Inactive: The triggered incidents when Audio Out 1 & 2 hasn't been triggered. It can
be Command(String), Logic Out, Multi Function.
MIC in Gate: Enable/disable the Gate function for MIC IN audio source. When the volume of MIC
input is lower than other audio source, even it's priority is higher, the zones for MIC IN will be auto
replaced for other sources with lower priority.
When enables the [Mic In Gate] setting on [Audio Setting], the Line Threshold/Hold Time
function will display and can be adjust the parameters.
Dial Agent:
On PPM-IT5's webpage:
Agent Service: Enable/Disable the dial function. The PPM-IT5 will become the dial for other
device with telephone card such as ECS. You need to add a VoIP component for ECS by Ateis
Studio and type your IT5's IP at the Dial Agent field as shown in the picture below:
Once the setting is done, switch to Dial page on PPM-IT5 panel and you can start a telephone
call, see
Once enable this, the IT5 only remains the dial function.
