IDA8 Global-Net User Manual
314
© 2017, ATEÏS, member of PAX ProAV Group
paging or adjust the value of parameters.
Talk Indicator:
This LED light up if PSC is allowed to paging, on the other word, the paging request has been
acknowledged.
Sometimes even the paging request is granted, zones under paging still can be occupied by
other sources with higher priority. In the event of, the talk LED still lights up, you can check it from
busy LEDs.
Talk Key:
Push this key to request paging.
Hold LED:
These LEDs Indicate which keys are selected.
All/Release Button:
This button is used to select or deselect all keys.
All/Release LED:
This indicator lights up if all keys are selected.
3.2.19.2 Configuration
The example here is the IDA8 system, the configuration is the same for ESC, LAPG2T and other Ateis
Audio Processor.
Create PSC Object
1. Open or create a Ateis studio configuration file.
2. Drag IDA8C object to design window to create an audio processor object.
3. Drag PPM-AS to design window to create PSC object
PPM-AS, PCP, PSC and CDPM share the same object.
4. Wiring to connect green pins between PSC object and audio processor.
DSP component configuration
The audio of PSC needs to be routed from using the
component for paging
processing. See the following example.
