IDA8 Global-Net User Manual
494
© 2017, ATEÏS, member of PAX ProAV Group
5.21.2 Network Paging (Matrix & Switch Mode)
The Network Paging component routes the input source signal to zones using priority arbitration. The
pins at the left represent the paging sources and the pins at the right are zones. The pins on top allow to
control the paging activity and the pins on the bottom are the output logic signals which tell the status of
paging activity.
[Matrix]
[Sw itch Mode]
Network Cascading Paging
Some applications like PA station system requires a huge number of zones for paging by
connecting to multiple Ateis audio processors via Ateis Net. The Network Paging configuration of
every audio processor will be in charge of the paging tasks. See the example as below,
Double click the Network Paging component to open the settings window, the following sections
will describe the parameters of each tab.
Note: The Network Paging component will occupied with 2 x message channels, please refer to
[
] chapter.
