IDA8 Global-Net User Manual
250
© 2017, ATEÏS, member of PAX ProAV Group
SIP Auto Answer: The SIP call will be automatically picked up for monitoring use.
Half-duplex: Enable/Disable the function of half-duplex.
Pre-Chime/Post-Chime: The chime setting for paging.
SIP Active/Inactive: Active/Inactive the triggered incidents during the SIP call. The incidents can
be Command(String), Logic Out and Multi Function.
The following pictures show the change of a logic signal in time line graphic:
SIP active/ inactive indication
Logic Out (Single): Reverse m ode
Ringing Active / Inactive: Activate / Inactivate the triggered event when PPM-IT5 has received the
call and start ringing.
Paging Setting:
You can only enable one setting at a time.
TERRA Server Agent: Paging through Terra Server, you need to enable the "Family Status" as well.
o
TEERA Server IP: Enter the IP Address of your TerraServer.
IGMP Fix Address: This is for multi-paging. Enable the fix address to use the specific IGMP address
and disable the fix address to get IGMP address randomly.
Stack Paging: Audio paging will be sent prior if there are audio paging with higher priority. When
using this function, users can pre-record the paging messages and save into the PPM-IT5 first, and
then the recorded messages can be played by other PPM-IT5 consoles if any of it are in the idle.
+ Failed Percent: The failure rates/percents of the PPM-IT5 device if they can not paging
successfully and will not activate the function of [Stack Paging].
+ Wait Time: The waiting time of accepting the recorded paging message from [Stack Paging]
function to other devices.
Audio Setting:
