Ateis IDA8 Series User Manual Download

Page: 245 / 559

Product Features

245

2. Click [Hang up] button to end this SIP call.

Paging to multi-users (multi-zones):

1. Select multiple zone buttons which user wishes to paging to.

2. Then press

Paging call button.

Paging Message to Multiple Devices:

1. Select multiple zone buttons (devices).

2. Select the message file.

3. Press

Play Message button.

3.2.10.3.2 Dial

: Backspace.

CANC: Cancel all.

CAPS: Caps lock.

SIP Call:

Now the 100 in the Device List and call "100@1 user doesn't have to spend

much time on typing the entire URI on the touch panel. After enter the name,

and easily press the green

button and the complete address will be

dialed automatically if the name is existed.

For example, if you enter "100" and press the button, The PPM-IT5 will find

the exact device named92.168.100.1:5060".

Telephone Call:

If you're going to dial a local phone or a cellphone, type the number and

press

button.

You can re-dial the last number by

pressing

button.

Summary of Contents for IDA8 Series
















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IDA8 Series

Reviews:

Related manuals for IDA8 Series

Brands by name

Popular brands

Ateis IDA8 Series, User Manual

Search results

Summary of Contents for IDA8 Series

Reviews:

Related manuals for IDA8 Series

Brands by name

Popular brands