IDA8 Global-Net User Manual
262
© 2017, ATEÏS, member of PAX ProAV Group
The 3rd party device sends a command to call a device or a device group.
Source: Use the calling source (MIC IN or LINE IN).
Mode: Choose the calling mode (Intercom, Paging, EVAC Announce and Vote Announce).
o
EVAC/Vote Announce: This two call modes are only applicable when using PPM-IT5 to paging
to TERRA-RD. The paging priority: EVAC Announce > Vote Announce > Paging.
Security: If the [Security] option is enable, the caller cannot hang up the call during paging unless
the call receiver cancels the call itself.
Command-Call:
From the example picture above, if you wish to trigger the Call action via 3rd party device, please
send a command data as TERRA DS on 3rd party UDP/TCP software. TERRACOM will answer back in
ASCII code as below.
o
200 (ASCII Code) indicates OK (received).
o
400 (ASCII Code) indicates NG (not received).
The 3rd party device sends a command to play multiple message/s to a device or a device group.
Function: Select the message file/folder which you create on Media Setting > Internal/External
List.
Mode: Choose the calling mode (Intercom, Paging, EVAC Announce and Vote Announce).
o
EVAC/Vote Announce: This two call modes are only applicable when using PPM-IT5 to paging
to TERRA-RD. The paging priority: EVAC Announce > Vote Announce > Paging.
Security: If the [Security] option is enable, the caller cannot hang up the call during paging unless
the call receiver cancels the call itself.
Command-Message Play:
From the example picture above, if you wish to trigger the Message Play action via 3rd party device,
please send a command data as TERRA DS on 3rd party UDP/TCP software. TERRACOM will answer
back in ASCII code as below.
o
200 (ASCII Code) indicates OK (received).
