DSP Components
515
© 2017, ATEÏS, member of PAX ProAV Group
Then click [Add] button to open the
[Add Code] window.
Note: If you would like to add a new
code, click [Add] button to open the
[Add Code] window. There are two
ways to create a new code: Single and
Range. The code can be user-defined.
0 and minus number are forbidden to
use. eg: 0, -1, -10 etc.
Click [......] button to open the [Zone]
window and then start to choose
which zone you assign for paging.
Click [Add] button if you would like to
create more codes.
After that, double click the [TC
Receive] component to open its
window, select the item in [Paging]
drop-down box you have created.
Then click [Store] button to save the
settings into the machine.
Before calling via DTMF code, please
follow the instruction of paging
method.
Dial
= #X
o
# = start
o
= end
Example:
o
If you would like to paging to
Code [2], then dial #2
o
The paging function will be
activated right way after finishing
dialing.
Cancel the call =
#
Example:
o
If you would like to cancel the
paging, then enter #
o
The paging function will be
canceled right way after finishing
Redial:
When dialing the wrong code, simply redial the
correct code again after the wrong code.
Example:
o
If you dial the Code [3] to the wrong Code [2], you
only need to redial the correct code again (2) after
the wrong one. The situation might be shown as
#2#3
o
If the code you dial has been set as the EVAC, the
EVAC signal on front panel of your machine such as
IDA8C processor will also light up.
