Ateis IDA8 Series, User Manual

Page: 211 / 559

Product Features 211
© 2017, ATEÏS, member of PAX ProAV Group
o
Postposition: Enable or disable to play the chime message for post-announcement.
o
[...] Chime List: Open a setting window to build up list of message for selection.
Note: The name of chime can not be more than 16 characters (including the characters of file
format such as .wav or .g722). The name can be modified from Machine File System > Change File
Name .
Talk Mode:
o
Lock: First push for paging request, if request is granted then start paging, push again to end
paging.
o
Push: Push and hold the key for paging request, release the key to end paging.
o
Idle Lock: Set the time which the paging will automatically cancel once the microphone isn't in
operation.
o
Time Limit: Set the time which the paging will automatically cancel even someone is still talking.
Stack paging: When there are other paging sources with higher priority than PSS-AS during the paging
status, tick the checkbox to play the recorded paging message after the paging of other sources end.
Pre-record: Enable or disable to pre-record the audio message.
Unlock Screen Password:
o
Password: Set the customized password on the screen unlock.
o
Auto Lock (sec): Set the time to auto lock the screen.
Other:
o
Recording Time (sec): Time for recording the audio message.
o
Warning Tone Volume: Volume up/down for the warning tone. Note: Warning tone is a tone
which warns users that the circuit is connected to or is not in condition for normal operation.
o
EVAC: Enable to display the selected EVAC mode on the button of PSS-AS.
o
Mic. open in Bypass Mode: Enable to be in bypass mode and trigger audio paging via
microphone automatically.
o
Paging Source: Enable or disable the paging source on the button of PSS-AS.
o
Audio Source Selection: Enable to activate the [ Select Input & Output Source ] page on PSS-AS.
o
Using Font File: Enable to activate the custom font setting.
o
Auto reset selection after paging: Enable to deselect the zone buttons on PSS-AS panel after
paging.
o
Headphone audio detect: Enable this option, the PSS-AS will automatically switch output audio
from built-in speaker to headphone when a headphone is plugged.
Faults:
o
Report Faults: Enable to display the fault status on the button of PSS-AS. Eg: error message.
o
Display:
Major: Only display the major faults on the button of PSS-AS.
All: Display all the faults on the button of PSS-AS.
o
Warning Tone:
Off: Disable the warning tone function on PSS-AS.
Major: Enable the warning tone function when major faults are detected on PSS-AS.
All: Enable the warning tone function when any of the fault is detected on PSS-AS.