Ateis IDA8 Series User Manual Download

Page: 150 / 559

IDA8 Global-Net User Manual

150

S_ACT (Secondary Active Contact Output) /

P_ACT (Primary Active Contact Output):

The S_ACT and P_ACT contact outputs will inform the external device whether the primary or

secondary is active.

For example, when the RU status switches to the primary,

the P_ACT is close contact, and

S_ACT is open contact.

RU Status

P_ACT

S_ACT

Primary

Open

Secondary

Open

S_WD (Secondary Watching Dog Contact Inputs) /

P_WD (Primary Watching Dog Contact Inputs):

Connect the P_WD and S_WD inputs to the the Bypass Mode output on IDA8 processor. When IDA8

enters the bypass mode, the Bypass Mode output will inform the RU units, and the RU unit will

determine whether to activate the primary IDA8 or the secondary IDA8 processor by the monitored

P_WD and S_WD contact inputs.

The basic philosophy is that the master RU unit monitors the P_WD and S_WD inputs coming from

the primary and secondary IDA8 processors and decide which one can be active, and also passes

the decision to next RU units through EXP_OUT terminal. See the table as below.

For example, when RU detects P_WD and S_WD contact are closed, it switches to the

primary.

P_WD

S_WD

RU Switch Over

Primary

Open

Primary

Open

Secondary

Open

Primary

If the RU unit is set as the slave RU unit, it monitors the S_WD which connects to the master RU unit,

resulting in setting the primary or secondary IDA8 processors to be active.

Master/Slave Switch:

A dip switch to set RU-MAIN be master or slave. The difference between master and slave please

refer to item "(S_WD) Secondary Watching Dog".

Expansion Power Supply:

Output 24V DC power to next RU-MAIN/PDC/CTL devices.

There are two connectors of this output:

PRI: Connect to Power Supply PRI connector next RU-MAIN/PDC/CTL.

SEC: Connect to Power Supply SEC connector next RU-MAIN/PDC/CTL.

Power Supply:

24V DC power input, which is connect to 24V DC Output of IDA8C/S.

There are two connectors of this input:

PRI: 24V DC power input from primary audio processor.

SEC: 24V DC power input from secondary audio processor.

Speaker Zone Output:

Summary of Contents for IDA8 Series
















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IDA8 Series

Reviews:

Related manuals for IDA8 Series

Brands by name

Popular brands

Ateis IDA8 Series, User Manual

Search results

Summary of Contents for IDA8 Series

Reviews:

Related manuals for IDA8 Series

Brands by name

Popular brands