IDA8 Global-Net User Manual
308
© 2017, ATEÏS, member of PAX ProAV Group
Microphone Connector:
A phone jack connector for connection of telephone styled microphone.
Talk Button:
Press this button to request paging. There are two modes for this button: push to talk and lock.
Talk Indicator:
This LED light up if PCP is allowed to paging, on the other word, the paging request has been
acknowledged.
After the paging request is granted, zones under paging still can be occupied by other sources
with higher priority. In the event of, the talk LED still lights up, you can check it from busy LEDs.
Hold Indicator(1~8):
These LEDs Indicate which keys are selected.
All Call/Release Button:
This button is used to select or deselect all keys.
All Call/Release Indicator:
This indicator lights up if all keys are selected.
Event Select Key(1~8):
These buttons are used to select keys, each key may link to an event for triggering actions like
paging or adjust the value of parameters.
Busy Indicator(9~16):
Please refer to Busy Indicator(1~8).
Hold Indicator(9~16):
Please refer to Hold Indicator(1~8).
Event Select Key(9~16):
Please refer to Event Select Key(9~16).
3.2.18.2 Configuration
The example here is the IDA8 system, the configuration is the same for ESC, LAPG2T and other Ateis
Audio Processor.
Create PCP Object
1. Open or create a Ateis studio configuration file.
2. Drag IDA8C object to the design window to create an audio processor object.
3. Drag PPM-AS to the design window to create PCP object.
PPM-AS, PCP, PSC and CDPM share the same object.
4. Wiring to connect green pins between PCP object and audio processor.
