IDA8 Global-Net User Manual
154
© 2017, ATEÏS, member of PAX ProAV Group
3.2.1.3.1 Front Panel
Secondary Active Indicator:
This LED lights up if active system is primary audio processor.
Primary Active Indicator:
This LED lights up if active system is secondary audio processor.
Fault Indicator:
This LED lights up if the unit is set to be slave, and a short or open is detected on S. WD (Secondary
Watching Dog) port.
If this indicator lights up, it means there is an error of the unit, user needs to check wiring of S.
WD connector or replace by a good unit.
Power Indicator:
This LED lights up if this unit is powered.
3.2.1.3.2 Rear Panel
PDC Audio Output for Record:
The audio output of peripheral plugged on PDC connector.
PDC(Peripherals Device Controller) Connectors:
There are 2 sets of PDC port in IDA8RU-PDC, each set consist of three connectors, allow system to do
one PDC peripheral redundancy, the "N" is the number of set:
P_PDC N
Connect to one of primary audio processor's PDC connectors.
PDC N
Connect to peripheral which communicates to audio processor using PDC interface, for example
PSS-AS, PPM-AS.
S_PDC N
Connect to one of secondary audio processor's PDC connectors.
IDA8 Telephone Connector:
There are two connectors for IDA8 telephone line:
Primary Audio Processor Telephone: Connect to telephone line connector of primary audio
processor.
Secondary Audio Processor Telephone: Connect to telephone line connector of secondary
