Product Features
237
© 2017, ATEÏS, member of PAX ProAV Group
default value and it is suitable for most cases.
Success: Set this field could show "Success" when the target device informs URC220 the
command string is transferred successfully. This setting is optional, if you need it, please fill the
value "06 0D".
Fail: Set this field could show "Fail" when the target device informs URC220 the command string is
transferred failed. This setting is optional, if you need it, please fill the value "10 0D".
3.2.9.2.2 Import/Export Configuration
You can export the configuration of URC-200 to a file or import the configuration file.
Export: By clicking this button to export configuration of URC-200 to a file.
Import: By clicking this button to import configuration of URC-200 from a file.
3.2.9.2.3 Save/Load Configuration
The configuration of URC-220 is edited using the software. If you want URC-220 to run the configuration,
you need to save it to the device. See the below figure, you have to select the target URC-200 that to be
saved and then press the button [Save] to start save procedure. During the save period, the field
[progress] in the grid shows the percentage the save procedure done.
3.2.9.2.4 Reset Configuation
Sometimes if URC-200 power on with error, it needs to ignore current configuration, and reset to the
default status. Holds on both two keys on the panel, and plugs the ethernet wire to URC-200 to power on.
See the following demonstration.
